![]() If it is and you're afraid to go it alone, check out ifixit for more guides. NOTE: your computer may be slightly different. ![]() And that's it! Everything unscrewed and removed! Now let's put it back together again. Unscrew the two black Phillips screws on. Remove the four posts on the side of the hard drive with the T6 screwdriver. How to remove the hard drive from your MacBook Pro and install a new SSD Remove the screws holding the hard drive. Remove those and you'll be able to lift up the hard drive and unplug it. It's being held in place by 4 more screws. With the panel removed you can see the hard drive. Be sure to place them somewhere safe so they don't roll away into oblivion. Use the #00 screwdriver to remove all the screws on the back. Where I work we use Samsung SSD's and never had a problem, but you're free to use any 2.5 inch SATA SSD of your choice. So shut down your laptop and flip it over. The 2012 Macbook Pro uses a standard 2.5 inch SATA hard drive, which is what most laptop computers are using. But since you've already gotten this far you're probably both inclined to get it done AND have a machine past warranty anyway. Opening up your MacBook Pro opens you to the possibility of messing something up and voiding your warranty so if that bothers you you can just sit tight with what you have.
0 Comments
Leave a Reply. |